Drip irrigation system

Lašelinė laistymo sistema

The drip irrigation system differs from the usual one in that the water goes directly into the ground. As a result, there is no chance for water to evaporate before reaching the plant. Controlled water supply reduces the spread of disease because the leaves and stems of the plants simply do not get wet. This is just one of the advantages of a drip irrigation system , read about others below.

What are the advantages of a drip irrigation system?

The drip irrigation system has been widely used for a long time. This system is convenient to use in flower gardens, bushes, hedges and greenhouses. The drip system allows you to control and "dosage" the water in a targeted way, so the water is not wasted unnecessarily, because it only reaches the plant you want to water.

Drip irrigation is commonly described as a type of micro- irrigation designed to conserve soil nutrients, so many such irrigation systems are designed so that the water reaches the plant's roots.

The drip irrigation system can be automated. Every watering system consists of more or less the same parts, so we have highlighted some of the advantages of a drip irrigation system:

Water saving. Drip irrigation is designed to minimize water wastage and prevent evaporation as much as possible. Drip irrigation systems consume up to 50 percent. less water.

Extends the time plants receive water. The water supplied by the drip irrigation system reaches the deeper layers of the soil and the roots of the plants faster. Because water enters the soil slowly, there is no runoff. This slows down the process of soil erosion.

Prevents weeds from absorbing water and soil nutrients. Because drip irrigation systems direct water to plant roots, it is difficult for weeds to rob plants of soil nutrients and water. As a result, weeds do not grow or are not abundant.

Prevention against plant diseases. Excess moisture can cause the development of fungal or other diseases, insect and pest problems. The drip irrigation system leaves the plant leaves dry, thus preventing diseases.

Easy to apply. Most drip irrigation systems are easy to adjust and modify. They meet the needs of the plants, so the uniformity of watering is ensured.

Next in the text we will discuss:

  • The cost of a drip irrigation system - what stages make up an estimate for a drip irrigation system.
  • Drip irrigation system kit - what you should pay attention to when choosing kits for this system.
  • Drip irrigation system for greenhouse - why this irrigation system makes watering in greenhouses easier.

The price of a drip irrigation system

It is no secret that the installation of each irrigation system requires additional knowledge. Of course, installing a watering system, especially if it is a drip irrigation system, is not a very difficult job. However, automating this system would require more knowledge.

In general, it is best to entrust the work of installing an irrigation system to professionals who install such systems. Specialists know which materials and tools are the best, and the price corresponds to the quality.

Each irrigation system project is individual. Therefore, every element that is selected for your drip irrigation system meets your needs. The design of the irrigation system also depends on the size of the area you intend to irrigate.

Since the project of the irrigation system is made according to your personal needs, several steps must be taken. Our specialists advise that you need to determine which water container you will use, ie tap water or water container, tank. Another important step, which is distinguished by specialists, is the drawing of the plan of the irrigated area. The drawn plan must be accurate, so mark everything in the area you want to water.

After receiving the measurements and the plan of the irrigated area, the specialists create a plan for the irrigation system that meets your needs. Our specialists provide you with the drawn up plan and help you choose the tools that will be used when installing the system.

A drip system is often installed underground, but if it is installed on the surface, the color of the pipes is selected according to the color of the soil. Our specialists use only high-quality, standard-compliant Rain Bird products.

Each drip irrigation system project for private customers is created free of charge, while projects for commercial customers are charged.

Drip irrigation system kit

We mentioned that the drip irrigation system is characterized by efficiency and water saving. Such a watering system helps to better absorb fertilizers, reduces the growth of weeds and increases the yield and its quality. Another advantage of the drip irrigation system is that it can be installed in many places in your garden - in flower beds, around trees, bushes, next to hedges and even in greenhouses.

Each watering system has separate components that ensure that the plant receives the right amount of water. Drip irrigation ensures that the plants are irrigated evenly, which improves the quality of your harvest.

A drip irrigation system kit can consist of different components. Although some elements such as pipes, filters or controls are similar to other irrigation systems, a drip irrigation system differs in that it uses pipes that direct water to the plant's roots. Most often you can find the following types:

Perforated soaking hose . This is a method of irrigation where the water enters the rows of bushes or beds of other plants through the existing holes. One of the advantages of this type is that less water evaporates, as the soil immediately absorbs the released water. The system is designed so that water slowly drips into the plant roots through the holes. Typically, this type of hose can last up to 10 years.

Individual droppers . This type of system is usually installed in the entire garden - flower beds, next to bushes, hedges. It does not require a lot of your time, you can automate this drip system, so the plant will be watered only at the time you set. Most often, such a system is installed close to the soil so that water reaches the roots.

Gravity irrigation or spider irrigation. Widely used system for watering greenhouses, flower gardens or potted plants. This system is small, but very functional. For example, using this particular type of system will help you water potted plants faster and more efficiently.

In general, the drip irrigation system kit is designed so that each plant receives only the required amount of water, that is, the plant is not overwatered. Built-in pressure-regulating drippers distribute water evenly throughout the system. In this way, the system does not waste water and does not allow it to evaporate. A drip irrigation system can be fully automated, so the system will turn on and off only at a set time.

When installing a drip irrigation system, you can choose whether you want to hide it, i.e. bury it in the soil, or leave it on the surface. If you choose subsurface irrigation, the water is supplied to the plants underground, while the surface remains dry. In this way, you avoid weeds, because the water does not reach them. If you choose to leave the pipes on the surface, the color of the pipes will be adapted to the color of your soil, so it will not create an aesthetic image.

It is not difficult to install a drip irrigation system yourself. Installation does not require extensive specific knowledge. After choosing the type of drip irrigation system and the place where you want to install that system, all you need is connectors and pipes that you will connect to the water tank.

A few more advantages of the drip irrigation system:

  • Watered plants absorb fertilizers better;
  • It is not difficult to install it yourself, and if the work is done by specialists, the price is not high;
  • It is not necessary to level the surface of the earth.

Drip irrigation system for the greenhouse

Maintaining a greenhouse can be really difficult, especially if you are a beginner. In general, a greenhouse is a unique controlled environment that allows the gardener to oversee the process of plant growth. You need to monitor the temperature of that environment, water the growing plants, ventilate the greenhouse and so on. Drip irrigation systems facilitate watering in the greenhouse.

Irrigation systems are becoming more and more popular - many specialists say that it is not difficult to install an irrigation system in this space yourself. Such irrigation helps to precisely control soil moisture.

Many gardeners judge plant growth and yield based on soil moisture or appearance. For example, if the lower leaves of your plants are wilted, then your plants are probably lacking water. Regular watering with a hose usually wets the surface of the soil and keeps it moist for a long time, creating a breeding ground for mold.

A drip irrigation system for a greenhouse is a slow water supply system where water can be dripped drop by drop to the surface of the soil near the base of the plant. Of course, the water supply may vary depending on which drip system you choose. A properly designed drip irrigation system waters each plant with the appropriate amount of water.

Regardless of the watering system, the drip irrigation system for the greenhouse can also be automated. This is a more efficient method where the irrigation system takes care of the plants at a set time. The automated drip irrigation system is activated when the sensor indicates a suboptimal soil moisture level.

Uniform water use, convenience, and minimal cost are important goals when planning a greenhouse drip irrigation system. Therefore, before choosing the components of the irrigation system, pay attention to each of the elements that will allow you to achieve these goals.

The plan for such a project should start with the size of your greenhouse. It is best to divide the total area of ​​the greenhouse into equal or similar parts that will be watered. In this way, you will be able to control the system itself more easily, and you will be able to water each of the parts separately. Do not forget that it is very important to which water tank you will connect this watering system.

Often, the watering system is connected to the water supply, since the greenhouse watering system does not require high water pressure. An excellent solution when water storage tanks or rainwater tanks are used. In general, the functionality of the water tank is indisputable, because you can use the tank not only for the watering system of the greenhouse.

The most commonly used are rain tanks. The main advantage of these water tanks is that you can use rainwater to water your plants. This way you save well or tap water.

We mentioned that the drip irrigation system for the greenhouse can be automated. But what should be the frequency of watering plants? The frequency of watering in the greenhouse, as in the field, can be determined by the temperature of the air, the heat of the sun, the size of the plants, etc. Therefore, when connecting a drip irrigation system to a controller or timer, pay attention to the current situation.

The advantages of the drip irrigation system for the greenhouse are quite obvious - the watered plants receive the amount of water that meets their needs. Some more advantages of this system:

  • Reduced risk of mold or other diseases;
  • Water does not evaporate, so the plant receives the required amount of water;
  • Greater control over soil moisture.

You can find more information about the distributor here:https://www.rainbird.com/

Frequently asked questions

  1. How to choose a drip irrigation system?

Choose a drip irrigation system according to your needs. The choice of drip irrigation system also depends on the area and place you want to water. If you do not know which drip irrigation system to choose, contact our specialists, we will provide a consultation.

  1. What is the best drip irrigation system?

The best drip irrigation system is using individual drippers. In this way, the water from the irrigation system is directed directly to the roots of your plant.